Animal Derived Bioplastic: An Environment Responsive Substitute to Combat Climate Change

Authors

DOI:

https://doi.org/10.33571/rpolitec.v20n40a2

Keywords:

Plastic bags, Fossil fuels, Bioplastic, Starch-based plastic, Novel biological agents

Abstract

Plastics derived from fossil fuels are an important part of modern life and it is the most commonly used material in every industrial sector. The use of plastics is increasing day by day and its degradation has become a great challenge. Moreover, non-degradable plastic polymers tend to accumulate as waste in the environment posing a major ecological threat and climate change issues. Therefore, the identification of microbes that can grow easily on plastic and the novel biological agents with exert degradative potential on plastic material have been reviewd herein. In light of these, the enzymatic process can lead to the conversion of plastic into water, carbon dioxide, and methane as a byproduct. Furthermore, fossil fuels utilized to make plastic items are going to be shortened, therefore scientists are finding novel biobased alternatives. In this regard, starch can be promising biopolymer for bioplastic synthesis after understanding underlysing the biological deterioration process and biotic as well as abiotic mechanisms. Hence, this review specifically presents an extensive evaluation of bioplastic from animal waste that can bring revolutionary changes in the environment to mitigate the climate changes.

Article Metrics

 Abstract: 135  PDF (Español (España)): 67 

PlumX metrics

References

Geyer, R., J.R. Jambeck, and K.L. Law, Production, use, and fate of all plastics ever made. Science advances, 2017. 3(7): p. e1700782.

Li, Y., et al., Interactions between nano/micro plastics and suspended sediment in water: Implications on aggregation and settling. Water research, 2019. 161: p. 486-495.

Thakur, M.K., et al., Synthesis and applications of biodegradable soy based graft copolymers: a review. ACS Sustainable Chemistry & Engineering, 2016. 4(1): p. 1-17.

Al-Salem, S., et al., A review on thermal and catalytic pyrolysis of plastic solid waste (PSW). Journal of environmental management, 2017. 197: p. 177-198.

Jambeck, J.R., et al., Plastic waste inputs from land into the ocean. Science, 2015. 347(6223): p. 768-771.

Lamberti, F.M., L.A. Román-Ramírez, and J. Wood, Recycling of bioplastics: routes and benefits. Journal of Polymers and the Environment, 2020. 28: p. 2551-2571.

Rujnić-Sokele, M. and A. Pilipović, Challenges and opportunities of biodegradable plastics: A mini review. Waste Management & Research, 2017. 35(2): p. 132-140.

Dris, R., et al., Microplastic contamination in an urban area: a case study in Greater Paris. Environmental Chemistry, 2015. 12(5): p. 592-599.

Rahimi, A. and J.M. García, Chemical recycling of waste plastics for new materials production. Nature Reviews Chemistry, 2017. 1(6): p. 0046.

ARIKAN, E.B. and H.D. Bilgen, Production of bioplastic from potato peel waste and investigation of its biodegradability. International Advanced Researches and Engineering Journal, 2019. 3(2): p. 93-97.

Sanyang, M.L., et al., Effect of plasticizer type and concentration on physical properties of biodegradable films based on sugar palm (Arenga pinnata) starch for food packaging. Journal of food science and technology, 2016. 53: p. 326-336.

Avérous, L. and E. Pollet, Biodegradable polymers, in Environmental silicate nano-biocomposites. 2012, Springer. p. 13-39.

Gregory, M.R., Environmental implications of plastic debris in marine settings—entanglement, ingestion, smothering, hangers-on, hitch-hiking and alien invasions. Philosophical Transactions of the Royal Society B: Biological Sciences, 2009. 364(1526): p. 2013-2025.

Azahari, N., N. Othman, and H. Ismail, Biodegradation studies of polyvinyl alcohol/corn starch blend films in solid and solution media. Journal of Physical Science, 2011. 22(2): p. 15-31.

Vethaak, A.D. and H.A. Leslie, Plastic debris is a human health issue. 2016, ACS Publications.

Galloway, T.S., Micro-and nano-plastics and human health. Marine anthropogenic litter, 2015: p. 343-366.

Kershaw, P. and C. Rochman, Sources, fate and effects of microplastics in the marine environment: part 2 of a global assessment. Reports and studies-IMO/FAO/Unesco-IOC/WMO/IAEA/UN/UNEP joint group of experts on the scientific aspects of marine environmental protection (GESAMP) Eng No. 93, 2015.

Iwata, T., Biodegradable and bio‐based polymers: future prospects of eco‐friendly plastics. Angewandte Chemie International Edition, 2015. 54(11): p. 3210-3215.

Razza, F. and F.D. Innocenti, Bioplastics from renewable resources: the benefits of biodegradability. Asia‐Pacific Journal of Chemical Engineering, 2012. 7: p. S301-S309.

Laurentia, A., et al. Biodegradable Polymer Composite based on Recycled Polyurethane and Finished Leather Waste. in IOP Conference Series: Earth and Environmental Science. 2019. IOP Publishing.

Sprajcar, M., P. Horvat, and A. Krzan, Biopolymers and bioplastics. Plastics aligned with nature, Part of the Central Europe Programme-National Institute of Chemistry, Ljubljana, 2012.

Surendren, A., et al., A review of biodegradable thermoplastic starches, their blends and composites: recent developments and opportunities for single-use plastic packaging alternatives. Green Chemistry, 2022.

Hussain, S.Z., et al., Effect of seven non-conventional starch rich sources on physico-chemical and sensory characteristics of extruded snacks. Italian Journal of Food Science, 2022. 34(4): p. 44-56.

Shevkani, K., et al., Wheat starch production, structure, functionality and applications—a review. International Journal of Food Science & Technology, 2017. 52(1): p. 38-58.

De Araujo, M.C.B., P.J. Santos, and M.F. Costa, Ideal width of transects for monitoring source-related categories of plastics on beaches. Marine Pollution Bulletin, 2006. 52(8): p. 957-961.

Xiao, X., et al., Intercropping with garlic alleviated continuous cropping obstacle of cucumber in plastic tunnel. Acta Agriculturae Scandinavica, Section B–Soil & Plant Science, 2012. 62(8): p. 696-705.

Bélard, L., et al., Plasma-polymer coatings onto different biodegradable polyesters surfaces. European polymer journal, 2013. 49(4): p. 882-892.

Abreu, A.S.L.M., et al., Biodegradable polymernanocomposites for packaging applications, in Food packaging. 2017, Elsevier. p. 329-363.

Khosravi-Darani, K. and D. Bucci, Application of poly (hydroxyalkanoate) in food packaging: Improvements by nanotechnology. Chemical and Biochemical Engineering Quarterly, 2015. 29(2): p. 275-285.

Valera, M.J., et al., Cellulose production and cellulose synthase gene detection in acetic acid bacteria. Applied microbiology and biotechnology, 2015. 99: p. 1349-1361.

Moore, J.W. and C.L. Stanitski, Lengthening the chain: polymers in general chemistry. Journal of Chemical Education, 2017. 94(11): p. 1603-1606.

Yu, H.Y., Variation of elastic modulus during plastic deformation and its influence on springback. Materials & Design, 2009. 30(3): p. 846-850.

Kurtela, A. and N. Antolović, The problem of plastic waste and microplastics in the seas and oceans: impact on marine organisms. Croatian Journal of Fisheries, 2019. 77(1): p. 51-56.

Pérez-Andrés, J.M., et al., Effect of cold plasma on the techno-functional properties of animal protein food ingredients. Innovative Food Science & Emerging Technologies, 2019. 58: p. 102205.

Avila Rodríguez, M.I., L.G. Rodríguez Barroso, and M.L. Sánchez, Collagen: A review on its sources and potential cosmetic applications. Journal of cosmetic dermatology, 2018. 17(1): p. 20-26.

Khodaei, D., K. Oltrogge, and Z. Hamidi-Esfahani, Preparation and characterization of blended edible films manufactured using gelatin, tragacanth gum and, Persian gum. Lwt, 2020. 117: p. 108617.

Havstad, M.R., Biodegradable plastics, in Plastic waste and recycling. 2020, Elsevier. p. 97-129.

Muthuraj, R., M. Misra, and A. Mohanty, Hydrolytic degradation of biodegradable polyesters under simulated environmental conditions. Journal of Applied Polymer Science, 2015. 132(27).

Modjarrad, K. and S. Ebnesajjad, Handbook of polymer applications in medicine and medical devices. 2013: Elsevier.

Aisbl, P. and S. DECONINCK, Final report benefits and challenges of bio-and oxo-degradable plastics a comparative literature study. Polymers for Advanced Technologies, 2013. 32(4): p. 1-16.

Thomas, N.L., et al. Oxodegradable plastics: degradation, environmental impact and recycling. in Proceedings of the Institution of Civil Engineers-Waste and Resource Management. 2012. ICE Publishing.

Selke, S., et al., Evaluation of biodegradation-promoting additives for plastics. Environmental Science & Technology, 2015. 49(6): p. 3769-3777.

Aldas, M., et al., Effect of the prodegradant-additive plastics incorporated on the polyethylene recycling. International Journal of Polymer Science, 2018. 2018: p. 1-10.

do Val Siqueira, L., et al., Starch-based biodegradable plastics: Methods of production, challenges and future perspectives. Current Opinion in Food Science, 2021. 38: p. 122-130.

Imre, B. and B. Pukánszky, From natural resources to functional polymeric biomaterials. 2015, Elsevier. p. 481-487.

Guimaraes, J.L., et al., Characterization of banana, sugarcane bagasse and sponge gourd fibers of Brazil. Industrial Crops and Products, 2009. 30(3): p. 407-415.

Zuraida, A., et al., The effect of water and citric acid on sago starch bio-plastics. International Food Research Journal, 2012. 19(2): p. 715-719.

Yusoff, R.B., H. Takagi, and A.N. Nakagaito, Tensile and flexural properties of polylactic acid-based hybrid green composites reinforced by kenaf, bamboo and coir fibers. Industrial crops and products, 2016. 94: p. 562-573.

Lenz, D.M., et al., Multiple reprocessing cycles of corn starch-based biocomposites reinforced with Curauá fiber. Journal of Polymers and the Environment, 2018. 26: p. 3005-3016.

Dawale, S. and M.M. Bhagat, Preparation and characterization of potato starch based film blended with CaCo3 nanoparticles. Int J Eng Sci, 2018. 8: p. 16013-16016.

Syafri, E., Effect of precipitated calcium carbonate on physical, mechanical and thermal properties of cassava starch bioplastic composites. IJASEIT, 2017.

Mishra, R., N. Kumar, and M. Komarasamy, Lattice strain framework for plastic deformation in complex concentrated alloys including high entropy alloys. Materials Science and Technology, 2015. 31(10): p. 1259-1263.

Florencia, V., O.V. López, and M.A. García, Exploitation of by-products from cassava and ahipa starch extraction as filler of thermoplastic corn starch. Composites Part B: Engineering, 2020. 182: p. 107653.

Cereda, M.P. and O.F. Vilpoux, Varieties and Landraces: Cultural Practices and Traditional Uses. 2023: Elsevier.

Ezeoha, S.L. and J. Ezenwanne, Production of biodegradable plastic packaging film from cassava starch. IOSR Journal of Engineering, 2013. 3(10): p. 14-20.

Yang, J., Y.C. Ching, and C.H. Chuah, Applications of lignocellulosic fibers and lignin in bioplastics: A review. Polymers, 2019. 11(5): p. 751.

Fu, J., et al., Synergizing multi-plasticizers for a starch-based edible film. Foods, 2022. 11(20): p. 3254.

Koller, M., et al., Microbial PHA production from waste raw materials. Plastics from bacteria: natural functions and applications, 2010: p. 85-119.

El-Naggar, M.M. and M.G. Farag, Physical and biological treatments of polyethylene–rice starch plastic films. Journal of Hazardous Materials, 2010. 176(1-3): p. 878-883.

Kiing, S.-C., et al., Development of Biodegradable Plastic from Sago and Bario Rice Starch Blend. Journal of Polymer Materials, 2011. 28(3): p. 457.

Abral, H., et al., Characterization of tapioca starch biopolymer composites reinforced with micro scale water hyacinth fibers. Starch‐Stärke, 2018. 70(7-8): p. 1700287.

Judawisastra, H., R. Sitohang, and L. Marta. Water absorption and its effect on the tensile properties of tapioca starch/polyvinyl alcohol bioplastics. in IOP conference series: materials science and engineering. 2017. IOP Publishing.

Muneer, F., Biocomposites from natural polymers and fibers. Crop Production Science, 2015: p. 3.

Lopattananon, N., C. Thongpin, and N. Sombatsompop, Bioplastics from blends of cassava and rice flours: The effect of blend composition. International Polymer Processing, 2012. 27(3): p. 334-340.

Sultan, N. and W. Johari, The development of banana peel/corn starch bioplastic film: a preliminary study. Bioremediation Science and Technology Research 5 (1): 12–17. 2017.

Maulida, S.M. and P. Tarigan. Production of starch based bioplastic from cassava peel reinforced with microcrystalline celllulose avicel PH101 using sorbitol as plasticizer. in J. Phys. Conf. Ser. 2016.

Guimarães, J., et al., Studies of the processing and characterization of corn starch and its composites with banana and sugarcane fibers from Brazil. Carbohydrate Polymers, 2010. 80(1): p. 130-138.

AB, P.V.a.L., A Review on Bioplastics: Applications and Current Scenario. International Journal for Scientific Research and Development 2021. 9(3): p. 289-292.

Li, J., et al., Rapid biodegradation of polyphenylene sulfide plastic beads by Pseudomonas sp. Science of the Total Environment, 2020. 720: p. 137616.

Andrady, A.L., Microplastics in the marine environment. Marine pollution bulletin, 2011. 62(8): p. 1596-1605.

Webb, H.K., et al., Plastic degradation and its environmental implications with special reference to poly (ethylene terephthalate). Polymers, 2012. 5(1): p. 1-18.

Mohan, K., Microbial deterioration and degradation of polymeric materials. Journal of Biochemical Technology, 2011. 2(4): p. 210-215.

Tokiwa, Y., et al., Biodegradability of plastics. International journal of molecular sciences, 2009. 10(9): p. 3722-3742.

Artham, T. and M. Doble, Biodegradation of aliphatic and aromatic polycarbonates. Macromolecular bioscience, 2008. 8(1): p. 14-24.

Luckachan, G.E. and C. Pillai, Biodegradable polymers-a review on recent trends and emerging perspectives. Journal of Polymers and the Environment, 2011. 19: p. 637-676.

Niaounakis, M., Biopolymers: Reuse, Recycling, and Disposal. William Andrew. William Andrew is an imprinted of Elsevier: kidlington. 2013, Oxford OXS, 1GB, UK and Waltham, MA.

Singh, B. and N. Sharma, Mechanistic implications of plastic degradation. Polymer degradation and stability, 2008. 93(3): p. 561-584.

Ehrenstein, G.W., Polymeric materials: structure, properties, applications. 2012: Carl Hanser Verlag GmbH Co KG.

Booth, A.M., et al., Uptake and toxicity of methylmethacrylate‐based nanoplastic particles in aquatic organisms. Environmental toxicology and chemistry, 2016. 35(7): p. 1641-1649.

Kitamoto, H.K., et al., Phyllosphere yeasts rapidly break down biodegradable plastics. AMB express, 2011. 1: p. 1-11.

Pischedda, A., M. Tosin, and F. Degli-Innocenti, Biodegradation of plastics in soil: The effect of temperature. Polymer Degradation and Stability, 2019. 170: p. 109017.

Oberbeckmann, S., A.M. Osborn, and M.B. Duhaime, Microbes on a bottle: substrate, season and geography influence community composition of microbes colonizing marine plastic debris. PLoS One, 2016. 11(8): p. e0159289.

Price, D. and A. Horrocks, Combustion processes of textile fibres. Handbook of Fire Resistant Textiles, 2013: p. 3-25.

Rivera-Hoyos, C.M., et al., Fungal laccases. Fungal Biology Reviews, 2013. 27(3-4): p. 67-82.

Gómez-Méndez, L.D., et al., Biodeterioration of plasma pretreated LDPE sheets by Pleurotus ostreatus. PLoS One, 2018. 13(9): p. e0203786.

Ayuso-Fernández, I., A.T. Martínez, and F.J. Ruiz-Dueñas, Experimental recreation of the evolution of lignin-degrading enzymes from the Jurassic to date. Biotechnology for Biofuels, 2017. 10: p. 1-13.

Chandra, P., et al., Microbial lipases and their industrial applications: a comprehensive review. Microbial cell factories, 2020. 19: p. 1-42.

Singh, A.K. and M. Mukhopadhyay, Overview of Fungal Lipase: A Review. Applied Biochemistry and Biotechnology, 2012. 166(2): p. 486-520.

Zhang, K., et al., Understanding plastic degradation and microplastic formation in the environment: A review. Environmental Pollution, 2021. 274: p. 116554.

Almansa, E., et al., Enzymatic surface hydrolysis of PET enhances bonding in PVC coating. Biocatalysis and Biotransformation, 2008. 26(5): p. 365-370.

Yoshida, S., et al., A bacterium that degrades and assimilates poly(ethylene terephthalate). Science, 2016. 351(6278): p. 1196-1199.

Bhardwaj, U., et al., Polyhydroxyalkanoates (PHA)-Cellulose Based Nanobiocomposites for Food Packaging Applications, in Food Additives and Packaging. 2014, American Chemical Society. p. 275-314.

Yang, J., et al., Evidence of Polyethylene Biodegradation by Bacterial Strains from the Guts of Plastic-Eating Waxworms. Environmental Science & Technology, 2014. 48(23): p. 13776-13784.

Teeraphatpornchai, T., et al., Isolation and characterization of a bacterium that degrades various polyester-based biodegradable plastics. Biotechnology Letters, 2003. 25(1): p. 23-28.

Moog, D., et al., Using a marine microalga as a chassis for polyethylene terephthalate (PET) degradation. Microbial Cell Factories, 2019. 18(1): p. 171.

Yan, C., et al., Cellulose/microalgae composite films prepared in ionic liquids. Algal Research, 2016. 20: p. 135-141.

Sharma, B.K., et al., Production, characterization and fuel properties of alternative diesel fuel from pyrolysis of waste plastic grocery bags. Fuel Processing Technology, 2014. 122: p. 79-90.

Sarmah, P. and J. Rout, Efficient biodegradation of low-density polyethylene by cyanobacteria isolated from submerged polyethylene surface in domestic sewage water. Environmental Science and Pollution Research, 2018. 25(33): p. 33508-33520.

Kumar, A., et al., Biofilms: Survival and defense strategy for pathogens. International Journal of Medical Microbiology, 2017. 307(8): p. 481-489.

Khoironi, A., S. Anggoro, and -. Sudarno, Evaluation of the interaction among microalgae Spirulina sp, plastics polyethylene terephthalate and polypropylene in freshwater environment. Journal of Ecological Engineering, 2019. 20(6): p. 161-173.

Published

2024-09-27

How to Cite

Ansari, A. R., Arshad, M., & Sikandar, E. (2024). Animal Derived Bioplastic: An Environment Responsive Substitute to Combat Climate Change. Revista Politécnica, 20(40), 30–50. https://doi.org/10.33571/rpolitec.v20n40a2

Similar Articles

<< < > >> 

You may also start an advanced similarity search for this article.