Efecto de las fuerzas hidrodinámicas sobre la trayectoria de partículas minerales en concentradores gravimétricos tipo JIG

Autores/as

DOI:

https://doi.org/10.33571/rpolitec.v14n27a7

Palabras clave:

Solid-liquid interaction, Gravimetric concentration, Numerical simulation, High density suspensions, Eulerian-Lagrangian model

Resumen

La interacción hidrodinámica es un proceso sensible para los equipos de concentración gravimétrica. Debido a la no linealidad y complejidad de la interacción dinámica de las partículas sólidas y el agua, se necesitan modelos matemáticos confiables para desarrollar tareas de diseño total de planta (DTP). Para este fin, en este artículo se presenta un estudio del movimiento de partículas sometidas a un flujo pulsante para un perfil sinusoidal de agua en un jig, el cual es un equipo de concentración gravimétrica de alto rendimiento y alta recuperación, ampliamente utilizado en el procesamiento de minerales. Se utiliza el modelo matemático Euleriano- Lagrangiano (ELM), donde el movimiento del fluido se calcula mediante solución de las ecuaciones de Navier-Stokes y continuidad por medio de un procedimiento numérico ampliamente usado, llamado método semi-implicito para resolver las ecuaciones asociadas a la presión (SIMPLE). El movimiento individual de las partículas se obtiene por medio de un balance de fuerzas aplicando la segunda ley de movimiento de Newton a través de la acción de las fuerzas impuestas por el fluido y la gravedad. Las fuerzas de interacción sólido- líquido se calculan mediante el modelo matemático, extendido a una suspensión de partículas que poseen distribución amplia de tamaño y densidad. Los cálculos y la comparación de las fuerzas de Basset, gradiente de presión y masa virtual con las otras fuerzas (arrastre y empuje) que actúan sobre la trayectoria de las partículas en flujo de agua oscilatorio se llevaron a cabo para régimen de flujo turbulento. Se encontró que las fuerzas de Basset, gradiente de presión y masa virtual tienen un efecto significativo sobre la trayectoria de las partículas que ingresan al jig, influenciando su posterior concentración. Además, se determinaron, las condiciones bajo las cuales estas fuerzas pueden despreciarse en el modelo hidrodinámico del jig. El estudio mostró diferencias significativas en la trayectoria de las partículas para diferentes distribuciones de tamaño y densidad.

Métricas de Artículo

|Resumen: 490 | PDF (English): 318 | XML (English): 51 |

Citado por



Biografía del autor/a

Manuel Alejandro Ospina, ITM

Docente Tiempo completo

Departamento de mecatrónica y electromecánica

Liliana María Usuga Manco, ITM

PhD en Ingeniería: Ciencia y Tecnología de Materiales

Citas

M. O. Bustamante, A. C. Gaviria, and O. J. Restrepo, Class notes of the subject: minerals Concentration. Medellín: Universidad nacional de Colombia-sede Medellín, 2008.

R. O. Burt, “The role of gravity concentration in modern processing plants,” Miner. Eng., vol. 12, no. 11, pp. 1291–1300, Nov. 1999.

S. Cierpisz, “A dynamic model of coal products discharge in a jig,” Miner. Eng., vol. 105, pp. 1–6, 2017.

T. Phengsaart, M. Ito, N. Hamaya, and C. Baltazar, “Improvement of jig efficiency by shape separation , and a novel method to estimate the separation efficiency of metal wires in crushed electronic wastes using bending behavior and ‘ entanglement factor ,’” Miner. Eng., vol. 129, no. May, pp. 54–62, 2018.

F. Pita and A. Castilho, “Influence of shape and size of the particles on jigging separation of plastics mixture,” Waste Manag., vol. 48, pp. 89–94, 2016.

R. O. Burt, Gravity concentration technology, Vol 5. Amsterdam, Netherlands: Elsevier, 1984.

M. A. A. Aziz, K. M. Isa, N. J. Miles, and R. A. Rashid, “Pneumatic jig: effect of airflow, time and pulse rates on solid particle separation,” Int. J. Environ. Sci. Technol., no. January, pp. 1–12, 2018.

K. J. Dong, S. B. Kuang, a. Vince, T. Hughes, and a. B. Yu, “Numerical simulation of the in-line pressure jig unit in coal preparation,” Miner. Eng., vol. 23, no. 4, pp. 301–312, Mar. 2010.

S. M. Viduka, Y. Q. Feng, K. Hapgood, and M. P. Schwarz, “Discrete particle simulation of solid separation in a jigging device,” Int. J. Miner. Process., vol. 123, pp. 108–119, Sep. 2013.

F. W. Mayer, “Fundamentals of a potential theory of jigging process,” in 7th International Minerals Processing Congress, 1964, pp. 75–86.

L. M. Tavares and R. P. King, “A Useful Model for the Calculation of the Performance of Batch and Continuous Jigs,” Coal Prep., vol. 15, no. 3–4, pp. 99–128, 1995.

Y. Xia, F. F. Peng, and E. Wolfe, “CFD simulation of fine coal segregation and stratification in jigs,” Int. J. Miner. Process., vol. 82, no. 3, pp. 164–176, 2007.

Y. K. Xia and F. F. Peng, “Numerical simulation of behavior of fine coal in oscillating flows,” Miner. Eng., vol. 20, no. 2, pp. 113–123, 2007.

S. Viduka, Y. Feng, K. Hapgood, and P. Schwarz, “CFD-DEM investigation of particle separations using a Trapezoidal jigging profile,” in Ninth International Conference on CFD in the Minerals and Process Industries, 2012, pp. 1–8.

S. Viduka, Y. Feng, K. Hapgood, and P. Schwarz, “CFD-DEM investigation of particle separations using a sinusoidal jigging profile,” Adv. Powder Technol., vol. 24, no. 2, pp. 473–481, 2013.

R. Srinivasan, B. K. Mishra, and S. P. Mehrotra, “Simulation of Particle Stratification in Jigs Simulation of Particle Stratification in Jigs,” Coal Prep., vol. 20, no. 1–2, pp. 55–70, 1999.

B. K. Mishra and S. P. Mehrotra, “Modelling of particle stratification in jigs by the discrete element method,” Miner. Eng., vol. 11, no. 6, pp. 511–522, 1998.

B. K. Mishra and S. P. Mehrotra, “A jig model based on the discrete element method and its experimental validation,” Int. J. Miner. Process., vol. 63, pp. 177–189, 2001.

A. J. . Beck and P. N. Holtham, “Computer simulation of particle stratification in a two-dimensional batch jig,” Miner. Eng., vol. 6, no. 5, pp. 523–532, 1993.

M. A. Ospina-Alarcón and M. O. Bustamante-Rúa, “Hydrodynamic study of gravity concentration devices type JIG,” Rev. Prospect., vol. 13, no. 1, pp. 52–58, 2015.

M. A. Ospina-Alarcón, “Modelamiento de la hidrodinámica de la separación gravimétrica de minerales en jigs,” Universidad Nacional de Colombia, 2014.

M. A. Ospina-Alarcón, A. B. Barrientos-Ríos, and M. O. Bustamante-Rúa, “Influence of the pulse wave in the stratification of high density particles in a JIG device,” Rev. TecnoLógicas, vol. 19, no. 36, pp. 13–25, 2016.

E. F. Crespo, “Modeling segregation and dispersion in jigging beds in terms of the bed porosity distribution,” Miner. Eng., vol. 85, pp. 38–48, 2016.

K. Asakura, M. Nagao, and M. Mizuno, “Simulation of Particle Motion in a Jig Separator,” J. JSEM, vol. 7, no. Special Issue, 2007.

K. Asakura, S. Harada, T. Funayama, and I. Nakajima, “Simulation of descending particles in water by the distinct element method,” Powder Technol., vol. 94, pp. 195–200, 1997.

B. Mohammadi and O. Pironneau, Analysis of the k-epsilon turbulence model. New York: Jonh Wiley & Sons, 1994.

K. Asakura, M. Mizuno, M. Nagao, and S. Harada, “Numerical Simulation of Particle Motion in a Jig Separator,” in 5th Join ASME JSME Fluids Engineering Conference, 2007, pp. 385–391.

G. Rudinger, “Fundamentals of Gas-Particle Flow,” in Handbook of Powder Technology, vol. 2, Amsterdam, Netherlands: Elsevier, 1980, pp. 1–142.

M. Sommerfeld and N. Huber, “Experimental analysis of modelling of particle-wall collisions,” Int. J. Multiph. Flow, vol. 25, no. 6–7, pp. 1457–1489, 1999.

Y. D. Sobral, T. F. Oliveira, and F. R. Cunha, “On the unsteady forces during the motion of a sedimenting particle,” Powder Technol., vol. 178, no. 2, pp. 129–141, 2007.

S. V. Patankar, Numerical Heat Transfer and Fluid Flow. New York: Hemisphere Publishing Corporation, 1980.

H. P. Zhu, Z. Y. Zhou, R. Y. Yang, and A. B. Yu, “Discrete particle simulation of particulate systems: A review of major applications and findings,” Chem. Eng. Sci., vol. 63, no. 23, pp. 5728–5770, 2008.

A. B. Basset, A Treatise on Hidrodynamics, Volumen II. London, UK: George Bell and Sons, 1988.

L. Schiller and A. Naumann, “Über die grundlegenden Berechnungen bei der Schwerkraftaufbereitung,” Ver. Deut. Ing., vol. 77, pp. 318–320, 1933.

H. K. Versteeg and W. Malalasekera, An Introduction to Computational Fluid Dynamics., 2nd ed. London, UK: Pearson Education, 2007.

S. V. Patankar and D. B. Spalding, “A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flows,” Int. J. Heat Mass Transf., vol. 15, no. 10, pp. 1787–1806, 1972.

C. Coimbra and R. Rangel, “General solution of the particle momentum equation in unsteady Stokes flows,” J. Fluid Mech., vol. 370, pp. 53–72, 1998.

G. K. Batchelor, An Introduction to Fluid Dynamics. Cambridge, UK: Cambridge University Press, 1967.

H. Lamb, Hydrodynamics, 6th ed. New York: Cambridge University Press, 1975.

L. M. Milne-Thomson, Theoretical Hydrodynamics, 5th ed. London, UK: Macmillan & Co Ltd, 1962.

Publicado

2018-12-08

Cómo citar

Ospina, M. A., & Usuga Manco, L. M. (2018). Efecto de las fuerzas hidrodinámicas sobre la trayectoria de partículas minerales en concentradores gravimétricos tipo JIG. Revista Politécnica, 14(27), 68–79. https://doi.org/10.33571/rpolitec.v14n27a7

Número

Sección

Artículos